Key Features of the 8CH AI Mobile DVR

1. Eight-Channel Vehicle Video Surveillance

Monitor multiple areas of a commercial vehicle with an eight-channel recording system designed for comprehensive CCTV coverage.

Up to eight compatible vehicle cameras can be connected to capture different viewing angles, including the road ahead, vehicle sides, rear surroundings, driver cabin, passenger compartment, and cargo areas.

Key advantages:

• Simultaneous multi-camera vehicle surveillance
• Flexible camera positioning for different vehicle types
• Expanded video coverage compared with conventional 4-channel systems
• Video evidence for incident investigation
• Suitable for buses, heavy trucks, commercial fleets, and specialty vehicles

For large vehicles with multiple monitoring requirements, an 8-channel DVR provides the flexibility needed to build a more complete vehicle camera system.

2. ADAS – Advanced Driver Assistance System

The integrated ADAS technology analyzes road-facing camera footage to help identify potential driving hazards and provide timely driver alerts.

Depending on the selected algorithm configuration and calibration, supported safety functions may include:

• Forward Collision Warning (FCW): Alerts drivers to potential collision risks involving vehicles ahead.
• Lane Departure Warning (LDW): Warns when unintended lane departure is detected.
• Forward Vehicle Distance Monitoring: Helps identify potentially unsafe following distances.
• Driving Risk Alerts: Provides additional warnings for supported road-safety events.

ADAS technology helps drivers become more aware of potential hazards, supporting proactive safety management for commercial vehicle fleets.

3. DMS – Intelligent Driver Monitoring System

Driver fatigue, distraction, and unsafe driving behavior can create significant operational risks for transportation companies.

The Driver Monitoring System (DMS) uses AI-assisted camera analysis to detect configured driver behaviors and provide warnings when supported events are identified.

Depending on the DMS camera and firmware configuration, detection functions may include:

• Driver fatigue and drowsiness
• Driver distraction
• Mobile phone usage while driving
• Smoking behavior
• Eyes-off-road conditions
• Other supported driver monitoring events

DMS-based monitoring allows fleet operators to develop a more proactive approach to driver safety by combining recorded video with intelligent behavioral alerts.

For fleet managers, these events can provide valuable context for driver coaching, safety reviews, and operational improvement.

4. BSD – AI Blind Spot Detection

Large commercial vehicles often have significant blind spots around the sides and rear of the vehicle.

The Blind Spot Detection (BSD) function uses compatible AI camera inputs to help identify relevant road users or obstacles within configured detection areas.

Depending on camera placement and algorithm capabilities, BSD applications may include:

• Side blind-spot monitoring
• Pedestrian detection within supported zones
• Cyclist detection within supported zones
• Vehicle proximity awareness
• Blind-spot alerts during supported driving situations

BSD is particularly useful for heavy trucks, buses, delivery vehicles, and other commercial vehicles operating in congested urban environments.

By integrating BSD with ADAS and DMS, the AI Mobile DVR provides a broader safety monitoring solution covering both external road conditions and driver behavior.

5. Up to 4TB HDD Storage – Two Configurations Available

Video retention is an important consideration for commercial fleet surveillance, especially when multiple cameras record during long driving shifts.

The 8 Channel AI Mobile DVR supports a maximum total HDD capacity of 4TB, with two available hardware versions.

Version 1 – Single 4TB HDD

• One HDD installation position
• Maximum supported HDD capacity: 4TB
• Suitable for projects requiring a single large-capacity hard drive
• Convenient single-drive storage management

Version 2 – Dual 2TB HDD

• Two HDD installation positions
• Maximum supported capacity: 2TB per drive
• Maximum combined capacity: 4TB
• Suitable for projects requiring a dual-drive physical storage configuration
• Flexible drive selection and maintenance planning

Both configurations provide the same maximum nominal total storage capacity of 4TB.

The dual-HDD version should not be confused with an automatic data redundancy or RAID system unless that functionality is specifically supported.

Actual recording retention depends on video resolution, bitrate, compression, frame rate, active camera channels, recording schedules, and installed hard drive capacity.

6. Integrated AI Safety Monitoring for Commercial Fleets

Unlike a traditional vehicle DVR that primarily records video for later investigation, an AI Mobile DVR with ADAS, DMS and BSD adds intelligent event detection to the recording process.

These three AI technologies address different aspects of fleet safety:

• ADAS: Monitors supported driving hazards on the road ahead.
• DMS: Monitors supported driver fatigue and distraction behaviors.
• BSD: Monitors configured vehicle blind-spot zones.

Together, they create a more comprehensive intelligent vehicle monitoring system.

Fleet operators can use the resulting video and event information to support incident analysis, driver training, fleet safety programs, and operational reviews.

7. Vehicle Surveillance System Integration

The 8CH AI HDD MDVR can form the recording and processing center of a multi-camera vehicle security system.

A typical installation may include road-facing cameras, driver monitoring cameras, side-view cameras, rear-view cameras, in-cabin cameras, and vehicle display equipment.

Project configurations can be planned around:

• Number and positioning of vehicle cameras
• Required ADAS, DMS, and BSD functions
• HDD storage configuration
• Local video recording requirements
• Available vehicle installation space
• Compatible video interfaces and accessories
• Fleet monitoring and communication requirements

For projects requiring remote connectivity, GPS tracking, or centralized fleet monitoring, the available communication interfaces and compatible software options should be confirmed for the selected hardware version.

Applications of the 8 Channel AI HDD Mobile DVR

Heavy-Duty Trucks and Logistics Fleets

Heavy trucks often require multiple cameras to monitor forward road conditions, cargo areas, trailer surroundings, and vehicle blind spots.

An 8-channel AI Mobile DVR is suitable for building a comprehensive video surveillance system for heavy-duty trucks and long-distance logistics vehicles.

ADAS, DMS, and BSD functions can contribute to fleet safety programs, incident review, and driving risk management.

City Buses and Public Transportation

Public transportation operators need visibility into both passenger areas and the external driving environment.

The 8CH AI DVR can support multi-camera monitoring of driver cabins, passenger compartments, entrance areas, and vehicle surroundings.

Intelligent driver monitoring and road-risk detection provide additional capabilities for transportation safety management.

School Buses and Student Transportation

School buses benefit from extensive camera coverage and driver safety monitoring.

An eight-channel vehicle DVR can record activity around the vehicle, passenger compartments, entrances, and other important monitoring areas.

AI driver monitoring functions may support fleet operators in identifying selected unsafe driving behaviors during school transportation operations.

Construction Trucks and Industrial Vehicles

Construction vehicles, dump trucks, concrete mixers, and other heavy equipment may operate in environments with limited visibility and nearby workers.

Multi-camera surveillance combined with supported BSD functionality can help drivers monitor designated areas surrounding the vehicle.

The 8CH AI MDVR is a suitable foundation for customized safety monitoring systems in construction, industrial transportation, and specialized vehicle applications.

Commercial Delivery and Distribution Fleets

For companies operating delivery trucks, refrigerated vehicles, and distribution fleets, vehicle camera systems can support cargo security, incident investigations, and driver safety management.

The 4TB HDD storage option provides substantial local recording capacity, while the integrated AI functions add intelligent driver and road-risk monitoring capabilities.

Emergency, Municipal and Special-Purpose Vehicles

Emergency response vehicles, municipal service trucks, road maintenance fleets, and other specialty vehicles frequently require extensive video coverage.

The eight-channel architecture allows system integrators to design camera layouts according to vehicle-specific monitoring priorities.

ADAS, DMS, and BSD capabilities can be incorporated where appropriate for the vehicle's operating environment and installation requirements.